GS6918

GS6918 high pressure airless sprayers is with advanced technology and unique design,the failure of”Dead Point”in switching over will not occur easily to the high pressure air-less spray equipment of Model,GPA6C；this equipment will not also be caused to stop due to the “frost”formed by the “adiabatic expansion”at the exhaust parts;with a silencer of new type equipped,the exhaust noise of this equipment has been reduced greatly;with a gas distriution and switch over equipment of unique design equipped,the action of switching over of this equipment become both flexible and reliable with less compressed air consumption and reduced energy consumption;under equal main parameters,the weight of it is only 1/3 of the same kind of foreign products and the volume of it is only 1/4 of the same kind of foreign products;with comparative high working reliability,the coating cycle of it can be guaranteed in a better way so as to improve and ensure the quality of the coating.

Safety Explosion

Safety explosion proofing with compressed air as the motive power.

Eco-friendly ,Paint saving

GS6918 is time and labor saving, material saving, environment protection, less paint mist flying, low waste rate, paint saving and environmental protection,low maintenance rate, save maintenance cost.

Professional

GS6918 is with large output volume, ultra durable plunger pump body. Spraying volume can up to 50,000L per year for the professionals.

Specification:

Model Number:GS6918

Pressure conversion ratio: 69: 1

No-load displacement: 18L/min;4.75gpm

Inlet pressure: 3-6Bar/0.3-0.6MPa/43.5-87Psi

Air consumption: 250-2400L/min;66-634gpm

Cylinder diameter: Ф250mm/Ф9.8in

Note: The no-load displacement is the displacement pressure of the coating under

Net weight: 65kgs/143lbs (Body weight)

Gross weight: 85kgs/187.4lbs